Agri-Fab Lawn Vac Hose Extension Kit for Zero Turn Mower

Its a piece of hose !

This has worked beautifully on my Hustler Super Z mower.

Works very well, allows maneuverability! Easy to install.

I pull an agrifab mow-n-vac behind a john Deere x325. The John Deere has quadri-steer which made the turning radius during left hand turns to tight for the standard length hose.

This extension provides enough length to allow tighter turns without putting tension on the hose. Used it a few times now, seems to be doing just fine.

I use my Agri-Fab Mow-N-Vac Tow Behind Lawn Vacuum behind a 50’’ Dixie Chopper. Some minor changes, using the Agri-Fab Tow Behind Lawn Vac Hose Extension Kit for Zero Turn Mower were required to make it all function properly, but WOW, it woks great. I made an extension of the mower hitch of about 5 inches, which allows a greater turning radius. I also fabricated and installed on the mower just behind the right rear wheel, a bar made of 1 inch square steel tubing. I attached the vacuum hose to this bar about 24 inches from the shoot for support. Adding this bar removed any stress being applied to the hose at the point where it attaches to the mower shoot. These modifications allow me to make turns, greater than 90 degrees and maneuver the vacuum just about anywhere I need to go.

I use my Agri-Fab Mow-N-Vac Tow Behind Lawn Vacuum behind a 50’’ Dixie Chopper. Some minor changes, using the Agri-Fab Tow Behind Lawn Vac Hose Extension Kit for Zero Turn Mower were required to make it all function properly, but WOW, it woks great. I made an extension of the mower hitch of about 5 inches, which allows a greater turning radius. I also fabricated and installed on the mower just behind the right rear wheel, a bar made of 1 inch square steel tubing. I attached the vacuum hose... more

This hose is being used to replace my riding mower hose. It fits perfectly and I can see the leaves go through the hose and see if there's a blockage. I'm so pleased with this product.

Plastic connector to machine needs to be made of pliable metal broke 2 repaired 1 bought 2 spares otherwise works great.

The extension was just what I needed for my zero turn Craftsman mower. Prior to purchase, I kept tearing hoses at the intake of my Agri-Fab leaf vacuum. The hose was easily assembled onto the solid steel coupler and the two metal bands were tightened down.

I then drilled four holes on both the side leading to the mower and to the leaf vacuum. I then put in pop rivets from the inside out, so as to not obstruct the flow of material through the hose. We have a lot of trees on the property and the Agri-Fab vacuum works better than it ever has.

I recommend doubling up on bungee cords to hold the hose away from the mowers rear wheel on turns, as well as keeping the hose off the ground. This was an excellent purchase. Shipping was almost overnight and the price was right. Very happy with the company and would buy again from them.

The extension was just what I needed for my zero turn Craftsman mower. Prior to purchase, I kept tearing hoses at the intake of my Agri-Fab leaf vacuum. The hose was easily assembled onto the solid steel coupler and the two metal bands were tightened down.

I then drilled four holes on both the side leading to the mower and to the leaf vacuum. I then put in pop rivets from the inside out, so as to not obstruct the flow of material through the hose. We have a lot of trees on the property and... more

i love the clear hose so i can see if the vac. is working or is plugged. I did have a lot of trouble getting the metal connector on both hoses. i had to use a pail of hot water to loosen both hose sections then quickly attach them. (what a mess and a hassle) for what it cost this shouldn't have been an issue.

Ordered a hose kit. Easy ordering, quick delivery, and good price. We are satisfied.

I needed one about 6 feet long, but you didn't have different sizes, all you show is the 3-foot size. The ring and two bands were good to piece the one I have together.